This feeder sits down inside the bed of a UTV.  It is made of 16 GA Galvanized Steel and has a 4 inch chain driven auger. There is an actuator to control the chute up and down from the cab without getting out. It has a 12 volt motor with a 20ft "on demand" style switch with toggles to control Actuator and Motor from your seat that works off of a Deep Cycle auxiliary battery (NOT INCLUDED) (DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR UTV MECHANIC. MOTOR DRAWS 30 AMPS) The auger cover inside of the feeder adjusts for different Grain or Cube types.  This feeder has a capacity of holding up to 600 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is made to bolt to bottom of UTV bed. If mounted on load cells for a scale you must use extra metal between load cell and bottom ends of feeder for reinforcement. We offer a bracket for this. If mounted to 3/4" plywood, cut to measurement of UTV bed, makes for quick and easy removal.  Plywood not included.  Feeder Dimensions 30D x 43W x 41T. EMPTY FEEDER WEIGHT IS 230 LBS.

**CHECK MEASUREMENTS TO ENSURE PROPER FIT**

**RECOMMENDED BATTERY: Group 27M OR 31M MARINE DEEP CYCLE**

****ALL OF OUR PRODUCTS HAVE A 1-YEAR WARRANTY****

This Feeder will Dispense Milled Grain and CUBE/CAKE as well .

*Please allow 1 to 2 weeks for delivery.  Delivery based on time of year and shop backlog and can be confirmed at time order is placed.

***SHIPS ASSEMBLED AND FREIGHT CHARGES ARE ACCURATE FOR SHIPPING TO LOWER 48 STATES. PLEASE MAKE SURE YOU ARE ABLE AND AVAILABLE TO UNLOAD WHEN IT ARRIVES. IF NOT YOU MIGHT LOOK INTO A LOCAL BUSINESS FOR DELIVERY. PLEASE CALL WITH ANY QUESTIONS***

Maintenance on Chain Drive is required every 40 hours!