This feeder comes with a 5,000 lb. Digital Scale Kit and is ready to bolt in place and start using. Our 700 lb UTV Feeder has a 6" Chain Driven Auger that turns a slow 60 RPM to help prevent crushing of Cake/Cubes. It is powered by a 12 volt High Torque motor that draws 45 amps with a Resettable Circuit Breaker. It has an on demand style switch that has a 20' long cord for easy control from your seat and also a 4' Bonded Power Cable for attaching to a 27M or 31M Marine Deep Cycle Battery. It is made of mostly 10ga steel that is Welded and Powder Coated Black with an easy open lid from the ground that is the full width of feeder. The Auger Cover inside of the feeder adjusts for the different Grain/Cube types. It has a 6 inch sight tube for rear visibility. This feeder is backed by a 1-year warranty. Must be greased every 50 hours of use for optimum performance. The dimensions are 44" wide X 33" deep X 47" tall and weighs 550 lbs empty.

CHECK SIZE AND WEIGHT TO MAKE SURE THAT YOUR UNIT CAN HANDLE THE EXTRA LOAD.